BrandsSamsung

How to Hard Reset your Galaxy S10 5G

0

One of the most effective ways to solve software problems on your Galaxy S10 5G is a hard reset. Also known as factory reset or master reset, the hard reset returns the software configuration to its original factory state. If an error or problem is the result of new software changes, it is likely that the full reset will help fix them. In most cases, the full recovery is the final step of problem solving, as it requires some important tasks you must do to avoid losing things. For example, you want to make sure that your personal data is securely backed up in advance to avoid losing it.

Most problems disappear after a factory reset, so if you have already completed all the troubleshooting steps of the software, go ahead and clean the phone.

Before continuing, we want to remind you that if you are looking for solutions for your own #Android problem, you can contact us through the link at the end of this page. When describing your problem, be as detailed as possible so that we can easily identify a relevant solution. If you can, kindly include the exact error messages you are receiving to give us an idea of ​​where to start. If you have already tried some troubleshooting steps before sending us an email, be sure to mention them so we can omit them in our answers.

There are three ways to restart hardware on Galaxy S10 5G. Learn to do each one below.

Method 1: How to restart Samsung Galaxy S10 5G through the configuration menu

This is the easiest way to clean your Galaxy S10 5G. all you have to do is go under the Settings menu and follow the steps below. We recommend this method if you do not have problems to go under Configuration.

  1. Create a backup of your personal data and delete your Google account .
  2. Open the configuration application.
  3. Scroll down and tap General Administration.
  4. Press Reset.
  5. Select Factory data reset of the given options.
  6. Read the information and then touch Reset to continue.
  7. Touch Delete all to confirm the action.

Method 2: How to restart on Samsung Galaxy S10 5G using hardware buttons

If your case is that the phone is not starting, or it starts but the Settings menu is inaccessible, this method can be useful. First, you must start the device in recovery mode. Once you have successfully accessed Recovery, it is time that the appropriate master reset procedure begins. It may take a few tries before you can access Recovery, so be patient and just try again.

  1. If possible, create a backup of your personal data ahead of time. If your problem prevents you from doing so, simply skip this step.
  2. Also, you want to make sure that you delete your Google account . If your problem prevents you from doing so, simply skip this step.
  3. Turn off the device. This is important. If you can not deactivate it, you can never start Recovery Mode. If you can not turn off the device regularly with the Power button, wait until the phone’s battery runs out. Then, charge the phone for 30 minutes before starting the recovery mode.
  4. Press and hold the Volume Up button and the Bixby button at the same time.
  5. While holding down the Volume Up and Bixby keys, press and hold the Power button.
  6. The menu of the recovery screen will now appear. When you see this, release the buttons.
  7. Use the Volume Down button until Data Clear / Factory Reset is highlighted.
  8. Press the Power button to select Clear data / factory reset.
  9. Use Decrease volume to highlight Yes.
  10. Press the power button to confirm the factory reset.

Method 3: How to restart on Samsung Galaxy S10 5G using Find My Mobile

Find My Mobile is Samsung’s own service that allows owners of Samsung devices to remotely track their unit, unlock the screen, back up the data, block access to Samsung Pay or delete all data (reset of fabric). The steps to clean the device with Find My Mobile are very simple. However, the first thing you should do is make sure you set it up. You can not use the Find My Mobile service if you have not activated it on your device before losing it.

If this is the first time you use this service, here is what you must do to configure it:

  1. Open the configuration application.
  2. Click on the Biometrics and Security icon.
  3. Go find my mobile.
  4. Tap the Samsung account.
  5. Enter the details of your Samsung account.

We assume that you already have a Samsung account created before this. If you do not have one, be sure to create a Samsung account first. Then, use your information to enable Find My Mobile.

In the future, if you lose your phone and want to delete your data remotely, here is what you should do:

  1. On your computer, go to the Find My Mobile site: https://findmymobile.samsung.com .
  2. Login with the credentials of your Samsung account. The information must be the same as the one you used on the phone.
  3. Once you have logged in, simply click on the Clear data icon to begin the factory reset.
  4. A warning will be displayed asking if you want to continue, so simply click on DELETE.

Official Version of Kali Linux for Raspberry Pi4

Previous article

Honor 9X display

Next article

You may also like

Comments

Leave a reply

Your email address will not be published. Required fields are marked *

More in Brands